Matrix Industries Pty Ltd
Australian Leader in Acoustic and Remedial wall systems
MB01-Resilient Masonry Wall Tie
The MB range of resilient wall ties are a structural connection that reduces airborne and impact noise passing through masonry walls. They are particularly suitable for the discontinuous construction of masonry separating walls for apartments, villas & duplexes and any specialised room that requires high acoustic isolation such as cinemas, auditoriums and recording studios.
TYPE: A
CATEGORY OF WALL TIE: CAVITY
CLASSIFICATION OF TIE: MEDIUM
RATED CAVITY WIDTH: 50mm
MAXIMUM CAVITY WIDTH: 100mm
MB01
SPACING OF TIES (External Walls): In general work not more than 600 x 600 (as per masonry code)
SPACING OF TIES (Internal Walls): If designed in accordance with procedure Q02947-1, spacings Up to 1000 x 1000 can be achieved. (see structural Engineer's report on web site).
STRUCTURAL PERFORMANCE
Matrix Industries MB01 wall ties comply with Australian Standard 2699:1:2000 "Wall Ties" and AS3700.2001 "Masonry Structures". They are capable of transferring structural lateral forces (e.g. wind loads) from one masonry leaf to the other (CSIRO Test CZS6BTS3246). They are classified as a medium duty cavity tie with a minimum characteristics strength of 400 Newtons (N) in tension and 480 N in compression. MB01 ties can accept 10mm differential movement between the inner and outer leaves in both the transverse and vertical directions without loss of strength.NOISE REDUCTION
MB01 resilient wall ties were assessed in field tests comparing identical isolated and non-isolated rooms within the same building. The acoustic consultant’s report stated, “The vibration isolation incorporated into the building is working satisfactorily, reducing vibration and structure borne noise within the rooms. The measured difference between non-isolated [46dB(A)] and the isolated rooms [37dB(A)] is 9db(A).”This is achieved using Poron 4701 cellular urethane foam.DISCONTINUOUS CONSTRUCTION
Where a wall in a building is required to have an impact sound insulation rating under the requirements of the Building Code of Australia (BCA), such as between a bathroom, sanitary compartment, laundry or kitchen and a habitable room (other than a kitchen) in an adjoining building or unit, then for an acceptable masonry wall system, the ties are to be Matrix Industries MB-01 resilient wall ties and the wall is deemed to be of discontinuous construction.
Two leaves of 110mm clay brick masonry, min 50mm cavity, Matrix Industries MB01 resilient wall ties and either 50mm of suitable cavity insulation or 13mm cement render to each outside face will achieve Rw + Ctr not less than 50 and discontinuous construction.INSTALLATION
To maintain discontinuous construction of the MB01 it should be intalled to Matrix specifications.
Phone: +61 2 6553 2577 Fax: +61 2 6553 2585- www.matrixindustries.com.au